My #4 Chopper
- Thread starter chopper
- Start date
Those aren't stock forks are they? Mine are way different. If they are aftermarket where did you get them?
You got the RARE 3 Speed Sturmey-Archer Hub Stingray, and you didn't utilize it through a jackshaft set up for the engine to have 3 speeds!?!?!?!
Nice bike to find!
Man, I am jealous! I have been looking to run into a used rare 3 speed Stingray on the cheap
so I can R&D the Sturmey Archer Hub and see if it would live under engine power at higher speeds.
They say it's a planetary set up, and the ones built in the past few years are stronger than the originals from Raleigh in England, now that they are being made in Taiwan at Sun Race.
'B
Nice bike to find!
Man, I am jealous! I have been looking to run into a used rare 3 speed Stingray on the cheap
so I can R&D the Sturmey Archer Hub and see if it would live under engine power at higher speeds.
They say it's a planetary set up, and the ones built in the past few years are stronger than the originals from Raleigh in England, now that they are being made in Taiwan at Sun Race.
'B
go on Ebay and type in "OCC chopper motor mount" A gentleman named Barry can sell you the mount, exhaust and chain tensioners
Oh wait, my bad...
The frame is an original 3 speed stick shift frame,
but now that I view one of the close ups, the Sturmey Archer 3 Speed Hub
isn't present for this build.
Still have it?
I'd be very interested in it if you have it laying around.
The frame is an original 3 speed stick shift frame,
but now that I view one of the close ups, the Sturmey Archer 3 Speed Hub
isn't present for this build.
Still have it?
I'd be very interested in it if you have it laying around.
dont mean to horn in but an old man down the street has as i call them in my day an old english bibe it has a3 speed in it said he would take 25 bucks for it dont know what brand it is ??????? jw
Toad772
You have got to remember because of the large rear tire, the engine has to be offset in order for the chain to clear the tire.
You have got to remember because of the large rear tire, the engine has to be offset in order for the chain to clear the tire.
http://cgi.ebay.com/Motorized-Schwinn-OCC-Chopper-Bicycle-MOTOR-KIT-MOUNT_W0QQitemZ280371485808QQcmdZViewItemQQptZLH_DefaultDomain_0?hash=item4147715c70&_trksid=p3286.c0.m14&_trkparms=65%3A12|66%3A2|39%3A1|72%3A1205|293%3A1|294%3A50
there is the link to the mount kit
there is the link to the mount kit
