Still cold and nasty around here. I moved the girls away from the work bench.
I figured I'd set up the new Turnigy 2x300W 20A charger to do a storage charge set up.
But, mostly, to check it's calibration as best as I can.
This charger likes 3.85v per cell (23.1v overall/battery) as a storage voltage. Since the last
combined measurement with the voltage meter was 46.4v for the 12 cells, it didn't have too
far to go.
I almost didn't have time to press and hold "Start" until it played around and stopped at
23.10. battery in "Storage" mode.
I measured the total and separate cells in each battery with a number of monitors and
found that all the measuring devices varied at the 3.8X place a little.
But nothing wildly variable. (2 @3.83, 3 @ 3.86, 3 @ 3.84 and 4@ 3.85, if I remember correctly)
Since the charger settled in at a verifiable 23.10v/battery, I guess this battery charger is a keeper.
However, I'll continue to keep checking as I charge and discharge after and before riding....
"Riding"? What's that?