so far iv got it down pretty decent. i was looking at my bike one day thinking how i could get my reed block into the case for full advantage of the reed valve system. A couple hours later with a dremel i have it all mounted to the case and looking decent.
My plans:
-getting the crank trued and ill do my own balancing work
-26mm mikuni kx65 carb.
-hoca piston with motobecane rings
-twin plug fred head with compression release
-extensive porting work
-stuffing the crank
-centrifugal clutch
-maybe use a parmakit 75cc cylinder with 7 ports
-yz80 exhaust pipe
-32t sprocket
-huffy cranbrook
-hydraulic brakes
-suspension fork
i might try this exhaust
http://www.ebay.com/itm/151256949245?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649
or this one that i currently have on my current bike
http://www.ebay.com/itm/03-YZ85-yz-...Parts_Accessories&hash=item3cddd885d6&vxp=mtr
Here the carb
http://www.ebay.com/itm/19061826777...em=&sspagename=ADME:X:AAQ:MOTORS:1123&vxp=mtr
or this carb
http://www.ebay.com/itm/38044214606...em=&sspagename=ADME:X:AAQ:MOTORS:1123&vxp=mtr
Piston rings
http://www.1977mopeds.com/motobecane-47mm-airsal-piston-ring.html
My plans:
-getting the crank trued and ill do my own balancing work
-26mm mikuni kx65 carb.
-hoca piston with motobecane rings
-twin plug fred head with compression release
-extensive porting work
-stuffing the crank
-centrifugal clutch
-maybe use a parmakit 75cc cylinder with 7 ports
-yz80 exhaust pipe
-32t sprocket
-huffy cranbrook
-hydraulic brakes
-suspension fork
i might try this exhaust
http://www.ebay.com/itm/151256949245?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649
or this one that i currently have on my current bike
http://www.ebay.com/itm/03-YZ85-yz-...Parts_Accessories&hash=item3cddd885d6&vxp=mtr
Here the carb
http://www.ebay.com/itm/19061826777...em=&sspagename=ADME:X:AAQ:MOTORS:1123&vxp=mtr
or this carb
http://www.ebay.com/itm/38044214606...em=&sspagename=ADME:X:AAQ:MOTORS:1123&vxp=mtr
Piston rings
http://www.1977mopeds.com/motobecane-47mm-airsal-piston-ring.html