Got everything hooked up. Clutch working correctly, although it is still hard to pedal in normal, not motorized mode. When I got the kit the front sprocket was extremely difficult to turn, so I had to use the clutch to put the chain on. Pedaled, let go of the clutch, and I would just skid to a stop. Put the chain tensioner on, and turned the crank with all my might, trying to break the engine in. Now, instead of skidding while I try to start it, it will just gradually come to a stop. No bang, no engine noises, just the whirr of me slowing down. It is still extremely difficult to turn the front sprocket, even with the spark plug out. I put a tablespoon of oil in the spark plug hole, and I'm going to try starting it again in a few hours. Chain is true and tight. I have read alot of troubleshooting threads on here and can't seem to solve the problem. Any suggestions? Thanks in advance.
Attachments
-
79.7 KB Views: 708
-
73.8 KB Views: 496
-
66.5 KB Views: 510