Could I use a #41 master link and half link on a #415 chain, or would I have to get a complete #41 chain? Also, how well would a #41 work on a standard Chinese sprocket?
Chain question
- Thread starter ilovenxstage
- Start date
You shouldn't use a #41 master link on a 415 chain, as it will likely fail early. If you need a 415 master link, they are easily found on Amazon.com
http://www.amazon.com/KMC-415H-Connecting-CH4100-Chain/dp/B001CK0FMU/ (make sure you select 415, not 415H)
http://www.amazon.com/CHAIN-MASTER-2-Stroke-Motorized-Bicycle/dp/B00DDAB5DA
You can use a #41 on a 48/66 2-stroke kit in most cases. A few engines have tight clearance around the engine output sprocket, but most don't.
http://www.amazon.com/KMC-415H-Connecting-CH4100-Chain/dp/B001CK0FMU/ (make sure you select 415, not 415H)
http://www.amazon.com/CHAIN-MASTER-2-Stroke-Motorized-Bicycle/dp/B00DDAB5DA
You can use a #41 on a 48/66 2-stroke kit in most cases. A few engines have tight clearance around the engine output sprocket, but most don't.
#41 and #415 are different sizes. The master and half links are not interchangable. You'll need to match them with whatever size chain you're using.
Tom
Tom
Hi ilovenxstage!
Get a 41 chain comes in 10 feet for less than $9. Here's where I buy my chains and links.
http://www.agrisupply.com/agmate-single-roller-chain/p/84987/&sid=&eid=/
http://www.agrisupply.com/agmate-41-1-connecting-link-single-2-pcs/p/85033/&sid=&eid=/
http://www.agrisupply.com/agmate-41-1-offset-roller-chain-link-2-pcs/p/85038/&sid=&eid=/
Personally I purchased 2 10ft chains, 4 packs of master links and 2 packs of half links. That works out to a good 4 chains close to the price of 1 415 chain. And I have had no further problems of having to readjust the 41, unlike the 415 which needed constant maintenance.
Hope this helps.
Dave
AssembleThis
Get a 41 chain comes in 10 feet for less than $9. Here's where I buy my chains and links.
http://www.agrisupply.com/agmate-single-roller-chain/p/84987/&sid=&eid=/
http://www.agrisupply.com/agmate-41-1-connecting-link-single-2-pcs/p/85033/&sid=&eid=/
http://www.agrisupply.com/agmate-41-1-offset-roller-chain-link-2-pcs/p/85038/&sid=&eid=/
Personally I purchased 2 10ft chains, 4 packs of master links and 2 packs of half links. That works out to a good 4 chains close to the price of 1 415 chain. And I have had no further problems of having to readjust the 41, unlike the 415 which needed constant maintenance.
Hope this helps.
Dave
AssembleThis
