I ordered the 4 stroke 4g belt drive complete kit from bicycle-engines.com and it came today and I have to say I was pretty disappointed in the condition of everything I got. The tank was covered in scratches and deep grooves so a lot of the black paint is missing. The clutch is definitely used and shows some wear. The bag full of bolts had a hole in it and I am missing three of four bolts, so I'm going to have to make a trip to the hardware store.... I also ordered the poo poo exhaust, and the inside of it is totally rusted out and looks as if it was sitting outside for long periods of time. A lot of the nuts and bolts are rusted over. The transmission looks used as well because the 4g solid pulley has bent edges and doesnt make a complete turn when mounted to the engine as it rubs against the side of the clutch bell which is also definitely used as it already had the oillite bushing installed. Also the belt it came with is way too small and the gas line is literally 4 inches long which is way too short. Am i the only one who has experienced this or is this a common occurrence? Should I ask for a new kit and send it back or what?