I have a 2011 grubee skyhawk gt5 angel fire slant head 66cc with a cns carburetor the down tube or leak tube on my carburetor is spitting out gas i can understand a drip but its like draining out i've taken it apart looked at it all floats are good jets are clean and needle valve is fine it just seems like the gas is constantly running into the carb also they sent me a clutch cable that binds up so i cant make the bike idle once it starts i have to keep giving it gas to go or it'll die would a standard brake cable for a bike work and if u could help me figure out y the carb keeps flooding i haven't adjusted the pins inside the throttle like move it up or down can that effect how much gas is being put in it rides at about a 15° angle no matter how i place it on the intake tube even changing it to a larger side shifted intake tube it sits at about 15° also it will only run at full choke everytime i try to bring the choke down the engine looses power and unless i quick choke it again will die i've adjusted the choke cable everything i just think the fuel line is pumping way to much gas in constantly is there a way to slow down the amount of gas being pushed through the carb