S smileymale New Member Jul 18, 2010 45 0 0 oshawa Sep 16, 2010 #1 Ok make this short and sweet i pulled my piston out of the cylinder now how u get it back in around the o rings whats the trick
Ok make this short and sweet i pulled my piston out of the cylinder now how u get it back in around the o rings whats the trick
Kevlarr New Member Jul 22, 2009 1,628 4 0 Mi Sep 16, 2010 #2 You'll have to compress the rings but first make sure the gap in the rings lines up with the pin in the ring groves. You can use loosely fitted hose clamp as a makeshift ring compressor but I was able to get mine in with my fingers.
You'll have to compress the rings but first make sure the gap in the rings lines up with the pin in the ring groves. You can use loosely fitted hose clamp as a makeshift ring compressor but I was able to get mine in with my fingers.
Venice Motor Bikes Custom Builder / Dealer/Los Angeles Mar 20, 2008 7,272 1,810 113 Los Angeles, CA. Sep 16, 2010 #3 Yes!!! The pin in the ring grooves is the most important thing to watch out for!!!!
