Hi all,
After installing the kit on my bike i went to start it and with some tinkering i finally succeeded. Unfortunately i am unable to keep it running correctly. Here are a list of my problems
1. If i can get it to start, the engine will idle sometimes and once the throttle is moved it will immediately rev up like it is trying to take off. If i move the throttle again i can get it to come back down, the idle will then just slow until it dies. Regardless of what idle speed setting i have, it will do this.
2. I once got it to start and started to ride around the block, it would constantly 4-stroke with the slightest throttle movement, i then adjusted the c-clip to the richest setting and it still 4 strokes.
3. The throttle is basically non-responsive, there is relatively no fluctuation when the throttle is moved, either crappy idle or winding out sound.
Any help would be greatly appreciated.
Also, i am getting spark as i got a nasty shock a few times off of the magneto cables.
Thanks
After installing the kit on my bike i went to start it and with some tinkering i finally succeeded. Unfortunately i am unable to keep it running correctly. Here are a list of my problems
1. If i can get it to start, the engine will idle sometimes and once the throttle is moved it will immediately rev up like it is trying to take off. If i move the throttle again i can get it to come back down, the idle will then just slow until it dies. Regardless of what idle speed setting i have, it will do this.
2. I once got it to start and started to ride around the block, it would constantly 4-stroke with the slightest throttle movement, i then adjusted the c-clip to the richest setting and it still 4 strokes.
3. The throttle is basically non-responsive, there is relatively no fluctuation when the throttle is moved, either crappy idle or winding out sound.
Any help would be greatly appreciated.
Also, i am getting spark as i got a nasty shock a few times off of the magneto cables.
Thanks