thanks but i just have one problem im pretty sure that the three screws on the plate are striped i did not assemble the bike so i dont no to much about it when i purchased it it ran fine but now this.
If they are totally stripped, carefully drill the heads off of them. Slip the cover off the remaining stubs, and unscrew the stubs from the case.
Install new quality screws obtained from a hardware store, or do yourself a favor and get a hardware kit from SBP and do away with all the cheap junk hardware that the kits come with from the factory. http://www.sickbikeparts.com/catalo...ducts_id=43&osCsid=o9fjujj2iisa5t7gc3jvnj9pd7
the three screws that hold the plate over the small part of the chain .it covers the teeth that the chain is sitting on. and i think thats where the problem is