Hey guys, so I just bought a huasheng engine kit about a month ago. I just replaced the hoot engine with a grubee g4 which is an awesome improvement. I just put an odometer on my bike and the highest speed i can get on a flat road is 26 mph. Apparently I should be getting to 37 mph which is a huge difference. I ride at 1,083 m above sea level, so I don't know how my carb should be set if that is the problem. Anybody know what I should do?
Adjust carb?
- Thread starter Davee930
- Start date
Howdy Dave. I don't have one so am of no help but thought I would bump your thread so some one better versed then I would see your question.
Hey Dan thanks for the heads up I will see if I can help this guy.
Hi Davee930
I need to know first off what sprocket you have on the rear of your bike a stock 4G 5:1 ratio with 26.5 wheels and 11 tooth out put and a 50 tooth rear at max RPM = 33 MPH Max and if you are at higher altitude you will lose horse power and don't forget the speedometer your most likely not accurate. If you like I can give links to carb videos that can help you figure out how to adjust it
Cheers from BlowByU
Terry
Hi Davee930
I need to know first off what sprocket you have on the rear of your bike a stock 4G 5:1 ratio with 26.5 wheels and 11 tooth out put and a 50 tooth rear at max RPM = 33 MPH Max and if you are at higher altitude you will lose horse power and don't forget the speedometer your most likely not accurate. If you like I can give links to carb videos that can help you figure out how to adjust it
Cheers from BlowByU
Terry
