So i was looking around on ebay and found the x1 and x2 super pocket bike after market pipes. they have all types. i found 2 that will work great and even though i welded mine together this is a mod that can be done with a hack saw or saws-all! so most people can do this mod.
i used this one,
47CC 49CC MUFFLER EXHAUST PIPE POCKET BIKE X1 X2 EX25 | eBay
but this is also another bend option,
X1 X2 POCKET BIKE PERFORMANCE EXHAUST PIPE parts 49cc | eBay
the stock exhaust on the china kits slips into the REV pipes perfectly!!
all you have to do is cut your stock muffler right above the weld as it
goes in to the muffler.. trim the REV pipe to where it fits on you’re bike..
trim a one inch slit in the REV pipe. i drew a crude example in one of the
pics... slide the REV pipe on to the cut stock exhaust. clamp it together
with a hose clamp. you can also seal it with some hi temp silicone also..
use the long strap that comes with the china kit to strap the stock muffler
to support the REV chamber if needed. i was happy to find that the
rev pipe was of similar size to the "banana pipe" and works well.
i used this one,
47CC 49CC MUFFLER EXHAUST PIPE POCKET BIKE X1 X2 EX25 | eBay
but this is also another bend option,
X1 X2 POCKET BIKE PERFORMANCE EXHAUST PIPE parts 49cc | eBay
the stock exhaust on the china kits slips into the REV pipes perfectly!!
all you have to do is cut your stock muffler right above the weld as it
goes in to the muffler.. trim the REV pipe to where it fits on you’re bike..
trim a one inch slit in the REV pipe. i drew a crude example in one of the
pics... slide the REV pipe on to the cut stock exhaust. clamp it together
with a hose clamp. you can also seal it with some hi temp silicone also..
use the long strap that comes with the china kit to strap the stock muffler
to support the REV chamber if needed. i was happy to find that the
rev pipe was of similar size to the "banana pipe" and works well.
