Hi all. Since the change in temps lately, my bike has been overheating. I used to ride in 30-45f now I'm riding in 55f and up. I'm running 100:1 on husqvarna 2 cycle oil. I have a 32t sprocket and a X-80 slant head HT motor, with a iridium plug. I have looked up a few threads on the issue, I read that air leaks will cause overheating. I used some clear waterproof silicone on my carb around the edge of the carb outlet (the edge thats closer to the engine head, not the rear of the bike) I havent noticed a difference in power or throttle response.... I used to have a SPB thin head gasket on there, i recently swapped it back for the original. I also swapped the head to a BGF silver motor head. My exhaust gaskets (running double SPB aluminum gaskets) look sealed, as does my manifold gasket. I'm also running a Voodoo expansion chamber. I ran the gas bowl to make sure i dont have an air bubble. any ideas?