ill be putting it on 29" genisis w 30t sprocket 4g belt drive tranny w 80t pulley any idea what topspeed i canexpect? im rather exxited b4 w old engine best i got w 32 t reg hs 50 was 34-37 dep ter wind ext.
i finally pulled the trigger bought super titan
- Thread starter stewpedassle
- Start date
I can tell you now that your ratio is way tall... Sorry to say but your gonnna be burning up clutches all the time
Mine had a 100t pulley with a 36t rear sprocket and 26" wheels and it still was a bit high. I got a good 35-40 top end though
For something like 29" wheels you might be okay with a 54t sprocket, though I never built a 29er
And I've heard that four stroke in a genesis is a really tight fit?
Mine had a 100t pulley with a 36t rear sprocket and 26" wheels and it still was a bit high. I got a good 35-40 top end though
For something like 29" wheels you might be okay with a 54t sprocket, though I never built a 29er
And I've heard that four stroke in a genesis is a really tight fit?
20
80
4 to 1 ratio
10?
30
3 to 1 ratio
12 to 1 overall ratio
29" wheels at 7800 rpm is 56 mph
You are going to really excited when your bike barely moves off the line,
and you burn your clutch up.
What happened to your 50 cc Hausheng engine?
i have no compression or time so had to replace , i live on flat land ran real lean boom
but lesson learned on that but last engine w 32 t gave me 32-35 mph w 44t gave 27 mph i weigh bout 240 so this time went 30t clutch never been issue
but lesson learned on that but last engine w 32 t gave me 32-35 mph w 44t gave 27 mph i weigh bout 240 so this time went 30t clutch never been issue
ty moto for info its on the wy i dont mind peddeling off the line im in jacksonville.fl public transit sucks and everything is miles awayso need top speed
