As we all know that the stock gas tank studs will eventually leak do to vibration and or over tightening. Well after my tank started to leak for a second time I got to thinking. There has got to be a way to mount without putting a lot of stress on the welds. So I sanded those areas and put a washer a nut used this metal patch stuff called quick steal is like a putty. Built it up to the bolt set another washer on it finished it off with bondo. Grabbed some light weight steel and fabricated my own clamps and used the cheap stock ones by turning them up side down and slit washer washer nut. I had to play with it and open up the hole a bit because I wanted the tank to be close as possible to the top tube. Put some light weight rubber on the clamps and tightened it all up and five tank fills with no problems what so ever.