View Single Post
Old 07-19-2009, 08:34 PM
floridaboy's Avatar
floridaboy floridaboy is offline
Motorized Bicycle Elite Member
Join Date: Apr 2009
Location: Hudson, FL.
Posts: 133
Default Re: working crusier without a tensioner

The clamps were from Home Depot in the elec. department. They were for 3/4 inch tubeing. The metal used was 1/8 inch alum. The hardest part was cutting the slot for the bolt for the tensioner. It has proved to work out real well. Hope this helps.
Reply With Quote