hey im new and i wanted to put a poulan pro model 114 on my pulse 180 magma fitness 10 speed bike. i know some of the things i want to do but i still want extra tips on what to do about some things i will be getting 2 1 inch sprockets and a 10 in sprocket if i can find one because i want to make a chain drive type. i want to mount the engine on the bike carrier rack. i want to keep my original back tire so i can still be able to shift gears. i was goin to put a small sprocket on the engine an another on the right side of the pedal mount. i am going to weld these sprockets on i am going to weld the 10 inch on the other side of the pedal mount i also want to know since my biggest rear sprocket on my wheel is 5 inches in diameter if that really is about a good gear ratio since my wheel is 26 inches. i also want to know if there is a way to amp up the horse power of the weed wacker. i also need to know how to muffle the sound on the weed eater. lastly i need to know how to couple the brake line with the throttle line of the weed eater to make the throttle line longer. i will add more details as i go along becausse i still haven't gotten everything together. your new friend Takeem P.S i also want to know if a bicycle shop sells sprockets that big.