Smaller Intake Needed

Discussion in 'Motorized Bicycle General Discussion' started by Pitchfork311, Aug 14, 2009.

  1. Pitchfork311

    Pitchfork311 New Member

    Joined:
    Apr 29, 2009
    Messages:
    69
    Likes Received:
    0
    Any one have an idea where I can get a smaller intake?
     
  2. wheelbender6

    wheelbender6 Active Member

    Joined:
    Sep 4, 2008
    Messages:
    3,819
    Likes Received:
    11
    The intake at Manic Mechanic looks shorter, but check with them.
    You can shorten your intake by cutting out a section and then connecting the
    two pieces with a heater hose. There are several more complicated solutions posted on the site.
     
  3. Pitchfork311

    Pitchfork311 New Member

    Joined:
    Apr 29, 2009
    Messages:
    69
    Likes Received:
    0
    Ya I have one of manics intakes. With my New reed valve mod and my cns carb, I cannot use his. I cut it even shorter, but my new cards bowl sticks down lower than stock, contacts clutch.

    I was looking for more of a shorter stock one, I like the citting and using a hose idea. But I found one that will proly work. Its a intake that instead of going up, it turns out and puts the carb just outside of frame, above the gear box. Should work out perfect. Ill post a pic when I get a chance.
     

Share This Page