hi everone new guy with some questions

Discussion in 'Introduce Yourself' started by dustin4863, Jul 19, 2009.

  1. dustin4863

    dustin4863 New Member

    Joined:
    Jul 19, 2009
    Messages:
    1
    Likes Received:
    0
    i guys been ghosting round the site decided to join but i have a few questions.
    i have a madwagon fulsom i believe i would like to know what kits will fit this bike i would prefer an 80 cc but will settle if i have to.
    thanks
    dustin
     

    Attached Files:

  2. Bikeguy Joe

    Bikeguy Joe Godfather of Motorized Bicycles

    Joined:
    Jan 8, 2008
    Messages:
    11,529
    Likes Received:
    3
    If it has about a square foot opening, it should go no problem. It looks like an in frame kit will fit.
     
  3. wheelbender6

    wheelbender6 Active Member

    Joined:
    Sep 4, 2008
    Messages:
    3,819
    Likes Received:
    11
    The Madwagon is almost the perfect bike to be motorized (frame mount engine). It's made heavy and comes with strong MTB brakes.
    A couple of things to watch-
    The down tube looks oversized so you may need a to get front motor mount for oversized frame tubes or you can make one with a muffler clamp.
    If that lower top tube interferes with the carb, you can alter your intake manifold by sawing it in half and use a heater hose to make a flexible section.
    There are many posts on this site about both issues.
     

Share This Page