BlowByU's Production Bike #2 Felt 1903

Discussion in 'Motorized Cruiser Bicycles' started by Terry Blow, Aug 8, 2010.

  1. Terry Blow

    Terry Blow Dealer & Custom Builder

    Joined:
    Oct 29, 2009
    Messages:
    1,117
    Likes Received:
    0
    Hi every one
    I finally have the bike I have wanted to build right from the beginning, Felt 1903 this bike is right out of the box. This is only one of three bikes I purchased but I want to build this one most of all the other two bikes are a (Felt Hot Wheel 68) this will be production bike #3. The next bike will be a (Felt Magno) this bike will be production bike number #4. This build thread will be mostly pictures I missed making a few videos showing a few things like install the engine and install the throttle but those will be the only videos in this thread unless I get a request then I will do that. Here are internet pictures of the bikes I bought I will post the real shots later.


    felt_1903_blk_09_s[1].jpg

    felt_hotwheels_08_s[1].jpg

    felt_magno1sp_usa_09_s[1].jpg
     
  2. Terry Blow

    Terry Blow Dealer & Custom Builder

    Joined:
    Oct 29, 2009
    Messages:
    1,117
    Likes Received:
    0
    I have the pictures I promissed less than an hour to post these I have no patients or it is like my bday something like that. I would like to dedicate this build to my brand new son his name is (Tanner Westley Jonh Blow) I will start the pictures with a picture of Tanner
    SANY0084.jpg

    SANY0083.jpg

    SANY0080.jpg

    SANY0081.jpg

    SANY0082.jpg
     
    #2 Terry Blow, Aug 8, 2010
    Last edited: Aug 8, 2010
  3. Terry Blow

    Terry Blow Dealer & Custom Builder

    Joined:
    Oct 29, 2009
    Messages:
    1,117
    Likes Received:
    0
    Here are a few more so the code name for this build is (Tanner)
    SANY0079.jpg

    SANY0077.jpg

    SANY0078.jpg

    And so it begins
    Cheers from BlowByU
    Terry
     
  4. Terry Blow

    Terry Blow Dealer & Custom Builder

    Joined:
    Oct 29, 2009
    Messages:
    1,117
    Likes Received:
    0
    Oh and I promissed the wife not to build this bike for another few weeks untill we get settled with the new one (ie) Tanner
     
  5. Dan

    Dan Staff
    Staff Member

    Joined:
    May 25, 2008
    Messages:
    12,495
    Likes Received:
    50
    Awwww. Good lookin' lil MBer there! He is gonna have those beefy, wrench turning hands, eh? Our best to Mom and Tanner.
     
  6. Terry Blow

    Terry Blow Dealer & Custom Builder

    Joined:
    Oct 29, 2009
    Messages:
    1,117
    Likes Received:
    0
    Hi Dan
    He was born July 30th we got lucky again he is a fairly quiet baby and he is doing what baby boys do best Eat S--T & Squawk. I will tell Glenda you said to give her your best. I am going to start work tomorrow 7am which is great and sad all at the same time I would like to have had this company support my family never even came close to that happening oh well such is life thanks for dropping in Dan as so looks like I will not have this bike done by the dead line.
    Cheers
    Terry
     
    #6 Terry Blow, Aug 11, 2010
    Last edited: Aug 11, 2010
  7. Whizzerd

    Whizzerd New Member

    Joined:
    Nov 20, 2009
    Messages:
    101
    Likes Received:
    0
    Congrats Terry! What a handsome lil' guy!( Bet he favors mom, eh? HaHa) Love your choices on Felt models. I just got in a new Worksman Cruiser. The paint job looks like it was done by a 5 yr. old with a spray can. Sad really. I just kept thinking " I paid $$$$ for this?" Anyway, looking forward to your upcoming builds. Bring on more "Fabulous Felts!"
     
  8. Terry Blow

    Terry Blow Dealer & Custom Builder

    Joined:
    Oct 29, 2009
    Messages:
    1,117
    Likes Received:
    0
    Thank you he dose look his Mom LOL I love the Felts you really can't go wrong I have some photos I took will post them later. I am going to try and do a few full custom things to these bikes. Like custom sprockets with the HD axle kits I am going to make custom filler necks for the tank and hand crafted exhaust hoping to make it with variable back pressure (ie) loud or quiet. Any how the new job is going to slow things right down I will keep pugging away at it
     
  9. Terry Blow

    Terry Blow Dealer & Custom Builder

    Joined:
    Oct 29, 2009
    Messages:
    1,117
    Likes Received:
    0
    Here are some pics of the Hot Wheels I was luck enough to get this one at dealer cost witch was still more expensive that the felt MP was here is Canada but I could not pass up such a great challenge for a technical build
    SANY0103.jpg

    SANY0104.jpg

    SANY0105.jpg

    SANY0106.jpg

    SANY0107.jpg
     
  10. Terry Blow

    Terry Blow Dealer & Custom Builder

    Joined:
    Oct 29, 2009
    Messages:
    1,117
    Likes Received:
    0
    Here are the pics of the Magno not nearly as good of a deal as the Hot Wheels but a good buy never the less
    SANY0109.jpg

    SANY0110.jpg

    SANY0111.jpg

    SANY0113.jpg

    SANY0114.jpg

    Hope you like the pics
    Cheers
    Terry
     
  11. Whizzerd

    Whizzerd New Member

    Joined:
    Nov 20, 2009
    Messages:
    101
    Likes Received:
    0
    All Great lookers Terry. Don't mean to sound presumptuous but that HotWheels is SCREAMING HuaSheng/ Grubee III/ SBP shift kit!
     
  12. Terry Blow

    Terry Blow Dealer & Custom Builder

    Joined:
    Oct 29, 2009
    Messages:
    1,117
    Likes Received:
    0
    That is the only way it will ever work 3" tire no where to put the sprocket on the left side with the disk brake there good eye my man. so it is going to be a sick bike parts one or a full custom fitted one from my friend Brian Nash of nashmoto | home with the 4G T Belt Drive no matter what this will be the coolest Hot Wheels to ever hit the roads
    Cheers
    Terry
     
  13. nemlu7

    nemlu7 New Member

    Joined:
    Dec 25, 2008
    Messages:
    42
    Likes Received:
    0
    Congratulations to you and missus for your new son. I bet when he grows up,he wont have any problems installing his first engine kit!!.crt.
     
  14. Terry Blow

    Terry Blow Dealer & Custom Builder

    Joined:
    Oct 29, 2009
    Messages:
    1,117
    Likes Received:
    0
    LOL thank I am sure you are not far off and Glenda says thank you also
     
  15. scotto-

    scotto- Custom 4-Stroke Bike Builder

    Joined:
    Jun 3, 2010
    Messages:
    6,530
    Likes Received:
    6
    That Hot Wheels has shift kit written all over it....truly! Nice Felts.
     
  16. Terry Blow

    Terry Blow Dealer & Custom Builder

    Joined:
    Oct 29, 2009
    Messages:
    1,117
    Likes Received:
    0
    Ya it dose
    BUT it also has challenge written all over it too look at the front and rear pedal sprockets front and rear are tiny will most likely have to replace them all
     
  17. GearNut

    GearNut Active Member

    Joined:
    Aug 19, 2009
    Messages:
    5,105
    Likes Received:
    1
    Congratulations on your son!!!!!
    The future CEO of Blow By U, Inc. ?
     
  18. The_Aleman

    The_Aleman New Member

    Joined:
    Jul 31, 2008
    Messages:
    2,658
    Likes Received:
    1
    Love the 60's-style plate on the Hot Wheels bike! My '63 F100 "unibody" has plates like those. Congrats and looking forward to seeing the builds!
     
  19. Terry Blow

    Terry Blow Dealer & Custom Builder

    Joined:
    Oct 29, 2009
    Messages:
    1,117
    Likes Received:
    0
    OK so it is still laying in a pile of parts in my basement but most of the parts are in for it. Now this bike is getting special parts that have not been reviled yet like all new custom sprockets for the Grubee HD Axle kit with a 60 tooth sprocket for hill climbing and towing max top speed of 27 miles per hour m_b244924fe8be62f262b04069153de5ef.jpg . All new 60 tooth billet aluminum and colored black sprocket they are now available on my website This is a BlowByU exclusive also in the past I used a Ridley fuel filler neck but no more I will be using a custom filler neck designed by me this will be the coolest Custom so far
     
    #19 Terry Blow, Aug 15, 2010
    Last edited: Jan 20, 2011
  20. Terry Blow

    Terry Blow Dealer & Custom Builder

    Joined:
    Oct 29, 2009
    Messages:
    1,117
    Likes Received:
    0
    And Thank you The Aleman & GearNut
     

Share This Page