Separate names with a comma.
Rings are fine everything looks normal inside. I don't get it. I ordered new rings just to try
Ok I'll post what I find
I think I should get a new Piston and rings and try that
I agree Im new to these engines. I'm not sure how to fix it. But I'd like to try instead of replacing it
It came all together I can see the rings through the carb port
Would that be like new rings or something
That's what I was starting to think. How do I fix the compression? Any ideas
The big gear and the small gear and the clutch plate. I can hear the Piston pumping
this is with the motor not running the bike just sitting there I can push it freely without squeezing the clutch
Maybe I'm wrong but that's how the other bike is that I built
the sprocket that the chain is attached to is not supposed to turn unless you squeeze the clutch.mine turns no matter what whether you squeeze a...
Yes it is strange I'm at a loss not sure what to do. I'll keep at it
I can turn the small great with my hand and it moves the Piston up and down.
All 3 gears
Thanks I tried that also. Took the entire clutch apart checked spring and put it back together still doing it. The spring on the shaft was so...
I've tried loose, tight it still rolls
I also disconnected the clutch cable completely and the bike and chain still roll
Adjusted it same issue
The clutch engages but when I let go it still rolls like it's engaged when it isn't
Just got new motor from eBay this is my second build. The bike rolls freely when I press clutch and release it. It always rolls freely. Removed...