Search results

  1. S

    watch this video no helmet

    YouTube - ‪motorized bicycle wreck and aftermath‬‏
  2. S

    How did you get injured on your motorized bicycle?

    Re: How did you get injured on your motor bike? check this video out! bad ending http://www.youtube.com/watch?v=vY_Lw_YOVIM&NR=1
  3. S

    Idle screw making no difference??

    Thanks guys just found out the leak coming from the small gear seal on both of the same engine bought from the same seller! Will have it replace today so fingers cross it sorts it out. Cheers Goat herder & Matthurd
  4. S

    Idle screw making no difference??

    I have the stock NT and the Red cover carb both having same issues and normally I play around with the Idle screw to make correct adjustment but this time the screw won't do nothing?
  5. S

    Idle screw making no difference??

    yes its a 66cc china, the inlet gasket is sealed with RTV red stuff so seal is good and tight, the throttle assembly is not sticking and moving up and down without stress. I'm ??
  6. S

    Idle screw making no difference??

    hi guys and girls, today after finishing off my 5 build I started the bike and it started first go but it idle a bit to high, so I tried trying to tuned the carb by turning the idle screw out to make it idle less but made no difference to the idle?? I took out the screw and it started to...
  7. S

    Motorised BIcycle

    Hey guys and girls I thought I would share this little clip. YouTube - Motorized Bicycles http://texasmoondogmotorbikes.com/
  8. S

    Engine sputtering at higher speeds

    Took my bike out for a test ride and it started up fine and ran great, then when the engine starts to get warm/hot the problem starts over again!? No foaming in the lines. ??
  9. S

    Engine sputtering at higher speeds

    hi I'm getting the same exact problem with two of my 80cc gt4. riding at high speeds 45km's I get the feeling starving for fuel 3-4seconds then normal again and then it happens again. The C clip in the carb is on the second lowest position. Yesterday it was riding fine with great results but...
  10. S

    Does boost bottles work?

    Agree with the above answers. Its a WASTE of $$ . use the money on gas instead. brnot
  11. S

    Top Gear Jeremy on a Motorized Bike!

    Just thought I 'd share this clip I found on youtube. YouTube - Motorised Bicycles & Stretch Lada in Cuba - Jeremy Clarkson's Motorworld - BBC dnut
  12. S

    Clucth in at idle and engine reving out of control?

    Thank Jim. Norman I will change all the gaskets and lube all cable again and see how I go. No other sites give me more help & info then this one. Thanks to all!
  13. S

    Clucth in at idle and engine reving out of control?

    yep I do have the puller tool. I've checked for the woodkey thingy and its still good. Nothing wrong here. Will find another bolt as you said and will re screw it back in. Do you think that this bolt will cause the over reving when the clucth is puller all the way in norman? In the mean...
  14. S

    Clucth in at idle and engine reving out of control?

    Thanks guys for your help so far. I've checked for air leak and found the head gasket leaking a tiny bit and retighten the 4 bolts again. Now no more leak. I decided to change carb and put in a spare one that is newier version and still getting the same same problem. I took the...
  15. S

    Clucth in at idle and engine reving out of control?

    Yeah I used both inscents and carb cleaner. no changes
  16. S

    Clucth in at idle and engine reving out of control?

    yes the engine is good. No air leak. I can't seem to find an answer yet? Hope someone else can. thanks in advance!
  17. S

    Exhaust Gasket Replacement?

    I use $2 dollar store superglue and glue seal the edges. Then i use a very thin layer of RTV Silicone red stuff . Have not changed it for 6months so work excellent!
  18. S

    Engine Starts but when throttles..nothing

    might be choke spark oil fuel mix good luck