Search results

  1. Ralph hop

    Misfit Board Tracker

    Once again had to look up anvil height and sure enough the table comes to knuckle height, myself coming in at 5'6 on the drivers license but more close to 5'5 to be fair. My last girlfriend swore she was 5'5 and I was 5'6 but always said I had "bad posture". What can I say I like to relax haha.
  2. Ralph hop

    Misfit Board Tracker

    Lol Tom, my table is quite simple and crude but purpose built for bike building. Will be building a frame fixture some time soon and hopefully start designing some frames and forks. Here is a picture of the table design, cost 200 USD with a ten percent off coupon. Wanted it to be heavy so it...
  3. Ralph hop

    Misfit Board Tracker

    Thanks Tom, the bench was built this summer with 2x6 and 4x4, lag bolts and deck screws. So far have an swg-25 tube bender, hf tube roller, compact bender, vice and tube notcher bolted on it. The tube roller required some re-engineering along with the other tools. Swag off-road company sells...
  4. Ralph hop

    Misfit Board Tracker

    I've started on a bike to ride this spring using up parts laying around and hand making the rest from raw metal. The bike is being built to my preference so it might not resemble any one bike, we'll see how it takes shape. So far only has Two 24" wheels lol..and a leaf spring fork in the making.
  5. Ralph hop

    Misfit Board Tracker

    A chopped Servicar wow, had to look up some pictures and wasn't disappointed in what I found. Not sure I've ever really looked at a Servicar. And Dick Herb, what a name!
  6. Ralph hop

    Misfit Board Tracker

    Not much has happened lately but have been collecting parts. Chose to use an old 8 hp briggs carb and a honda velocity stack. I'm thinking I might build a solid rod linkage for it instead of a cable throttle. Picture is sideways.
  7. Ralph hop

    COVID-19 Vaccine

    And as far as I'm concerned I don't care if it's flavored sugar water loaded in the hypo for the first round. This whole operation is a scientific death cult.
  8. Ralph hop

    COVID-19 Vaccine

    This particular concoction consist of human Genes from an aborted baby that was cloned back in the sixties. No deaths in this chart but also does not list the condition of the health impacts. Unable to perform normal daily actactivities, unable to work.. could be paralysis or coma, they don't go...
  9. Ralph hop

    COVID-19 Vaccine

    Health impact events are listed as "unable to perform normal daily activities, unable to work, required care from doctor or health care professional. So far out of 112,807 recorded first doses there have been 3,150 health impact events.
  10. Ralph hop

    COVID-19 Vaccine

    I think it's worth mentioning that this isn't a vaccine at all. It's completely disengenuous for any person in the health/science systems to describe it as such. It's more accurate to be named gene therapy.
  11. Ralph hop

    Old Guys Simplex moto-peddle bike

    Worth while reading and tons of insight, also have a happy Thanksgiving one and all! I think we all need it, if only one or two maybe twenty folks should take a day to celebrate together.
  12. Ralph hop

    Are clutch-ups possible?

    That method would be really hard on the clutch and rear sprocket assembly. I have pulled wheelies at the lower end of the power band by hitting the throttle and pulling up on the bars. The 66cc is capable of that but with my weight would probably kill the engine by dumping the clutch.
  13. Ralph hop

    How to run bearings in this set up?

    Tom as a fellow beer enthusiast I'm sorry to have snaked you on that deal. I'm ashamed of myself. Regretfully and sincerely, Ralph
  14. Ralph hop

    Electra straight eight predator 212 Honda clone

    Cool bike! No problems with oiling with the engine tilted forward past verticle? Does it have the stock connecting rod with the oil dipper or another rod?
  15. Ralph hop

    Hi from the UK - INDIAN Board Tracker tribute, my first build

    I didn't even get a box Pete, just a tag with my address wired to the head tube. Lots of dirt and some flash rust. Hopefully you're rust isn't so bad.
  16. Ralph hop

    How to run bearings in this set up?

    You can also use 28.6" mountain bike seat post.
  17. Ralph hop

    How to run bearings in this set up?

    Here are the dimensions written on the piece. I mentioned sanding because it's a very tight fit. My seatpost is now pretty much permanent but once I started tapping it in with a hammer from that point there was only one way to go.
  18. Ralph hop

    How to run bearings in this set up?

    Hey rocket, I'm building with the same frame currently. You can search on my thread for some ideas. I used a flanged seat post bushing and I will advise that you sand the seat post to bare steel before driving it home as the chromium layer is pretty heavy on the post I used. The seat post spacer...
  19. Ralph hop

    Hi from the UK - INDIAN Board Tracker tribute, my first build

    I'm looking forward to follow the progress of this new bike. It will be a nice canvass for Pete's work.