Roll Your Own CDI

GoldenMotor.com

Are You Going to Roll Your Own CDI?


  • Total voters
    123

rich4240

New Member
Jun 6, 2012
55
0
0
lefroy
here is my idea in a scamatic and bredbored will it work or no if not y do i have it all conected right
hey rohmell and all outhers i want to bulid the retartede setup insted of a set uf cap could i use a pot or a trimer or Potentiometer so i could adjust the timeing well rideing

thanks in advance
 

Attachments

Cagiva4ever

New Member
Oct 25, 2010
43
0
0
Finland
hi !

electronics schematics etc understanding to Common people is a Global problem. even that it aint that difficult at the end really. This sounds stupid reply from me, as we most of us know this is it.

but i want to Thank you and others providing input in this topic, as This is what ive been dreaming for past 15 years. To follow such an Topic and to learn and just repeat info from it that i knew already.

in other words nothing from this topic is for loss. being nooby or not nooby reader. ive been following this from summink page 5 beginning..

personally i own in my collection over30 2-strokes, so im loving this topic.

ps btw, does any1 happen to know a schematics source for Digital timing light ? ive found1 from US patent office... "digital timing light gun Snap-On tools US4713617"

any1 found something same around issue from motelek.net ,from Russia ? as they seem to have so much reverse engineered..

i have plans to replicate functions from Zeeltronic i.e digital timing readout indicator, for a magneto triggered ac cdi.



bye:)
m
 

rohmell

Active Member
Jun 2, 2010
1,531
6
38
New York
hi, sorry to bring a old thread back to life.
The info on here is gold!
I did a cdi kit from silicon chip see:
http://archive.siliconchip.com.au/cms/A_110499/article.html

I saw this kit mentioned early in this thread, and was curious if that design is able to be modded to have an advance/retard curve for a 2 stroke?
any hints would be great :)
An RC network hung off of the SCR's gate will most certainly give you the capability to change the timing curve.
 

Theon

New Member
Jan 20, 2014
1,440
6
0
FNQ Australia
Not sure if this has been covered,
And I have read through a fair bit, but 60 pages!
What timing light do you use?
My old timing lights seem to be broken, should get a new one.
But want to make sure it will be 'compatible' with my Ht Motors.
Any suggestions would be appreciated.
Been meaning to get around to ordering some parts for Cdi, but wondered about building a Timing light circuit while I was at it, if any one has any suggestions there?
Cheers.
 

Pablo

Master Bike Builder & Forum Sponsor
Dec 28, 2007
3,696
33
48
Duvall, WA PNW
www.sickbikeparts.com
We could design/have one built for us, but then everyone would scream at us for stealing someone's CDI design, when in reality NO one here or previously here had the original idea in the first place!
 

Theon

New Member
Jan 20, 2014
1,440
6
0
FNQ Australia
How much?
To get one of your adjustable Cdi's here to Oz?
I have a Honda TRX 250 (Quad) coil or 3 would that be alright?
Kit form would be OK, as would parts only.
But if reasonable I'd be happy to buy complete.
Wil any Xeon timing light do?
 

janoherrera

New Member
Jun 4, 2014
5
0
0
Mexico
Found schematics on the Russian motorized bicycle forum:
Ãëàâíàÿ
for the CDI, so I'm going to start experimenting, looks very simple and can be tailored for use with any old ignition coil you have lying around.

View attachment 34921
View attachment 34922
Hi Rohmell, I was follow all your post, tanks for give us your knowledge, i already building my own CDI but i cant find a 6V coil, can i use a 12V? Thanks!
 

janoherrera

New Member
Jun 4, 2014
5
0
0
Mexico
Hi every one, is great what you share with us, i already building my own cdi but i cant find in México a 6v coil, can i use a 12V one? Thanks!
 

janoherrera

New Member
Jun 4, 2014
5
0
0
Mexico
I figured out what happened, i put a bad quality cap, so I change it and ITS ALIVE, ALIVE!!!!! THANK YOU ALL!!! THIS BLOG IS PURE GOLD!!!