Recent content by Johnny trigger

  1. Johnny trigger

    First build

    Looks good. Youll wanna change the tensioner to the bottom of the chain. Keep the top tight since it spins counter clockwise..
  2. Johnny trigger

    Larger air intake tuning

    Its still kinda new. Moved down to 26-1. Next tank ill go 36-1
  3. Johnny trigger

    Carbureter fuel inlet elbow

    .... Yah was to big . Couldn't even fit a zip tie in. Im idiot. Just used 3/16 clear line.. thanks guys
  4. Johnny trigger

    Larger air intake tuning

    I was running a 68. Maybe tomorow ill try my new intake with a 67. Thanks
  5. Johnny trigger

    Larger air intake tuning

    I have. Was a bit black around the bend of the electrode tip. Its an NGK plug.. i just assumed that bigger filter ment bigger jet... i suposse i can thrown in some smaller jets and test it out again.
  6. Johnny trigger

    Larger air intake tuning

    Ill try . Thanks for your help
  7. Johnny trigger

    Larger air intake tuning

    I have the banana pipe on there now....the stock intake setup is running fine its the upgrade that im having trouble with
  8. Johnny trigger

    Larger air intake tuning

    Hello. I have the basic Chinese two-stroke bike set up. I added the offset intake and the velocity stack On the NT carb and fitted a biger cone filter. I assumed it meant more air so I slowly changed my jets bigger and bigger and I still have no WOT power. Should i have decreased the jet size...
  9. Johnny trigger

    Carbureter fuel inlet elbow

    Hey guys. I upgraded my fuel line to automotive black rubber line and cant get a clamp on the line to carb union. (Small leak).. anyone know where i can get that inlet in an elbow.? Thanks
  10. Johnny trigger

    HP carb tuning question

    I put original manifold and original carb with .68 jet. Sealed everything up good.20-1 gas with yamaha 2 stroke oil.(still newer engine)... starts and idols perfect. And goes near 40mph.. im happy... thanks for your help.
  11. Johnny trigger

    HP carb tuning question

    Thanks I’ll try that if it comes down to it I’ll just switch back to the original carb.
  12. Johnny trigger

    HP carb tuning question

    OK. I tried to seal the manifold with liquid Hondabond And it still leaks. Any ideas?
  13. Johnny trigger

    HP carb tuning question

    Yes thats the one. The plastic sleeve is installed and tightened up. Still leaks fuel around there. I have te NT jet in it.Should i down size the jet some? Plug was oiled up a bit.
  14. Johnny trigger

    HP carb tuning question

    Hey guys I have an HP carb and offset intake. Fuel leaks out around the carb to manifold connection. i assume its from the jet being to big? Or could it be from the carb not being completely level? Either way i switched the jet from the stock carb and its slightly better. I have a 20...
  15. Johnny trigger

    Covid-19 cruise

    Cheap cruising man...Be safe.