DIANY
Last Activity:
Dec 30, 2015 at 11:05 PM
Joined:
Mar 8, 2012
Messages:
127
Likes Received:
0
Trophy Points:
0
Location:
nampa

DIANY

New Member, from nampa

DIANY was last seen:
Dec 30, 2015
    1. davidstipek
      davidstipek
      use a thin paper material. Yamaha uses a thin paper material for cylinder head base gasket and the same thickness stainless metal sheet for head and cylinder gasket it has raises ridge around combustion chamber about 1/4 from inside wall. it flattens when torqued. I would use thinist paper gasket material you can find and use ballpeen hammer to cut out using cylinder wall housing (make two) use a sheet of the thick aluminum fol=il glued between the two gaskets and glue. use right away ( use pencil to open stud hole in foil) after one side of gasket is glued to it and holes are made you cn apply sealer to other side of foil and position 2nd gasket. This with insure you stay close to your original compressin and have strengthener in it. Also easy to remove if you screw up! don't forget to apply on both metal faces too (cylinder and head )
      david
    2. richter1984
      richter1984
      thats great diany. i saw all of ur pix n that is cool.
    3. Chrisflik
      Chrisflik
      When the bike was running top speed was 39.1. That was with a stock cdi and a 41 tooth sprocket, Dax carb, and gaskets matched.
      Now im running a 36 tooth. That's a mile per hour per tooth. So I should be automatically goin' an extra 5. So that should be 44mph. Now I got the jag cdi. Let's see if I get 1 mile for 75$?? 45mph?? Gen.1 high compression head. 1 mile?? I payed 75$ let's see if I get a mile for it? 46mph?? Beefed up wiring and spark system. 1 mile? Maybe?? 47?? And a total motor blue print. Everything ported polished the whole nine yards that you read about. Well let's see if that gets a mile for all the hard work. So 48??? Well that's the goal.. 9 extra miles.. Damn life sucks. I'm gonna hop on my Triumph now. And buy some Allen bolts and bolt this crap together. I'll hit u back with the results..
  • Loading...
  • Loading...
  • About

    Location:
    nampa