broken

For some reason my engine won't start I purchased a 80cc 2 stroke kit from eBay came with all the necassary parts I pulled the choke up I have checked the spark plug magneto and throttle tried starting without kill switch cables attached and with it on there is defiantly fuel flowing through the...

So this is my first build, and once it was all together, I found that on disengaging the clutch the bike would not roll but what little slack the chain would allow before the chain would run out of play and snag. I’ve gone through clutch re-set and cleaning procedures, such as cleaning the pad...

One of my back mounting studs snapped at the face of the crankcase. I tried using an extracting bit with a drill and after that didn't work tried using a dremel to cut a slot so I could use a flat head to back it out. Neither worked and chewed up the opening of the hole pretty good in the...

The first bike I had was a nightmare after the bolts in the front mount broke one morning on my way to work, I noticed something touching my leg and looked down to see my motor moving side to side, as soon as I pulled the clutch in the whole motor jumped off the frame and locked the bike up at...

I need to replace my bottom end and need to know if the motors from bekits are 8mm or 6mm. I keep seeing this when looking for bottom ends. How do you tell the difference?

My bike kills itself I pedal drop the clutch motor kicks on im still rolling, then i put the choke down (off) try to give it gass nothing it just slows down wont go and then shuts off, even when i hold the clutch back down. I think its not getting spark, bought a new plug same thing...

Hey guys, I'm kind of a newbie so i would appreciate a little help if you could. My chain snapped right off while i was riding, one of the links broke and i tried repairing it but its a nogo. so im going to wal-mart tomorrow to get a chain. I know how to change a chain on a regular bike but...

Aloha Forums, So i ordered a gasbike the starfire 66cc and I was very excited about it. During shipping i would watch tutorial videos & read instruction manuals so i could just put it together quick and ride it to work and school. Turns out upon shipping and receiving it came broken...

One of my front engine mount bolts broke about an eighth of an inch inside the engine mount. I tried using a grabit to get it out but that didn't work and it smoothed out the beginning of the threads on the engine. Can some one please help! Thank you. :-||