mount

The first bike I had was a nightmare after the bolts in the front mount broke one morning on my way to work, I noticed something touching my leg and looked down to see my motor moving side to side, as soon as I pulled the clutch in the whole motor jumped off the frame and locked the bike up at...

For some reason, I did not receive the nuts for the gas tank in my kit, and I was wondering what type and size nuts I need to use to screw onto the gas tank stubs to mount it to the bike? I will be visiting the hardware store once I know this, or bring the tank to the store. I just joined this...

Hi, let me start by saying that I am not too savvy with mechanical parts. That said, I've tried my best to make my HT engine work but even so I really need your guy's help. Engine Mount Firstly, the engine has never fit onto my bike (front tube is WAY too fat). I removed the front mount...

Hello all, im new to the forums and did a search and could not come up with anything regarding my build so here goes. Im building a rack mount dual engine bicycle build for my high school senior project so far i have stripped the bike (im not keeping the bicycle aspect of the bike and am...

I have had my bike for about 6 months. A couple months ago I heard a loud bang/crack while riding, while examining my bike I noticed one of the nuts on the back mounting stud was lose, I tightened it. I then noticed the other side was lose, however when I tightened it the whole stud slipped out...

I'm wondering what the common setup is for the cheap engines people sell online. What diameter bolt I should use and if/where I need washers or lock washers. I bought a 66/80cc kit online and didn't get any bolts for it. Went to a hardware store and bought three 1/4" x 1.5" nuts/bolts to hold...

Hi, I have an oversized mount on the engine. The mounts are wide enough, but the curve does not match with the tube. Therefore it would have a large gap. I took and shaped the thick rubber from a grip I had. My question 1) will this fail, strength and vibration. 2) The original...

hi, ive had my original 2-stroke bikeberry kit on my dad's old mountain bike for about 2 years now and everything is working great still. Although i will need to buy a THIRD rear wheel because the torque rips the spokes apart and a few have snapped already. I really dont want to be buying a...