What we did at Norms today

**Ilikeabikea** · #1 03-03-2008, 08:15 PM

Here's what we did at Norms today.

bdconner.com

deacon · #2 03-03-2008, 08:18 PM

Nothing happens for me when i hit the link except some kind of start your own site info

**Ilikeabikea** · #3 03-03-2008, 08:28 PM

I got the url wrong try it now...............

deacon · #4 03-03-2008, 08:44 PM

That is one big freakin' bike

**Ilikeabikea** · #5 03-03-2008, 08:49 PM

It's just like Cruiser's bike. 26 Schwin Jaguar. I moved my seat back a couple of inches. Otherwise my knees were hitting the handlebars....................

**paul** · #6 03-03-2008, 09:21 PM

how did you move the seat back? also when honing the ports which head on the dreamel. thank you for the pictures and the video. they are awesome

**Norman** · #7 03-03-2008, 09:25 PM

I used a diamond stone set from harbor freight and use what will fit in the hole, wide open. work careful it will tear up things quick.

**paul** · #8 03-03-2008, 09:33 PM

thanks! sooner or later i want to do a compete tear down and hone things while i am at it.

**Ilikeabikea** · #9 03-03-2008, 09:38 PM

I cut the seat post at a 45 degree angle and made a 90 degree bend and welded them together. Then I made another 45 degree cut and made another 90 degree bend and welded them together. Cool thing about round is you only have to cut one 45. Then you can turn it to make a 90.....................

**Ilikeabikea** · #10 03-03-2008, 09:41 PM

http://motorbicycling.com/attachment...pict3992sm.jpg

You can see it pretty good in this pic.