Motorized Bicycle Engine Kit Forum  


Go Back   Motorized Bicycle Engine Kit Forum > Motorized Bicycle Welcome Forum > Introduce Yourself

Introduce Yourself Meet & greet your fellow motorized bicyclists, make introductions and even find others in your area.

Thread Tools Display Modes
Old 05-07-2012, 09:11 PM
aaronbentzel aaronbentzel is offline
Motorized Bicycle Newbie
Join Date: May 2012
Location: York
Posts: 15
Default Addicted and Havn't Even Started

Hi my name is Aaron and I am from the great state of Pennsylvania. Originally, my interest was sparked about these bikes when my mother denied me idea of purchasing a motorcycle, as I was looking for a cheap, fun mode of transportation. Though I was struck down, in my many searches accross the internet, I came by these little beauties. Better yet, I could build and ride them without a license! I am mechanically inclined, as my grandfather owned his own machine shop, and I have been around machinery like that all my life, so these bikes piqued my interest. Being only 18, my mechanical experiances have been rather limited, so I thought this would be a good way to get to know the basics of engines (other than lawn mowers and smaller engines). Recently, in my engineering class in highschool, we were assigned a our final project, "Build Something that Does Something". I thought that this would be the perfect opportunity (or excuse XD) to finally buy one of these kits, and it should be here by tomorrow! All I have to say is that I am SUPER excited to get started, and the past couple nights my life has consisted mostly of scanning this forum and trying to learn everything I can.

So, in saying all that, what should be some of the first things I do to my bike/engine? I want to know some quick, simple tips that I can utilize to get my bike up and running well. I have two weeks before I present it, but trust me, I will not be done there. Until then, however, what are some things I should look out for? I know these engines can and will be very tempramental, so you guys will be my lifeline the next couple of days, just a heads up I really do appreciate advice from you guys!
Reply With Quote
Old 05-07-2012, 09:27 PM
robbomberbomyea's Avatar
robbomberbomyea robbomberbomyea is offline
Motorized Bicycle Elite Member
Join Date: Dec 2011
Location: toledo oh
Posts: 267
Default Re: Addicted and Havn't Even Started

welcome to the world of mabs, being a newbie myself the biggest challange i had faced was getting the chain and sprocket mounted correct all i can say is to take your time with it. mounting the motor was second getting it on the frame and clearing the cranks. the rest was pretty easy. every one says change spark plug wire and plug but ive had good luck using the stock ones. peace and good luck .
Reply With Quote
Old 05-07-2012, 09:49 PM
2door's Avatar
2door 2door is offline
Super Moderator
Join Date: Sep 2008
Location: Littleton, Colorado
Posts: 16,222
Default Re: Addicted and Havn't Even Started

Aaron, welcome to the forum.
You've certainly found the best place to look for help with your project. At your age I assume you are computer literate so spend some time here using the Google Custom Search feature and read all you can about mounting, chains, sprockets, etc. Just type in a keyword that you're interested in learning about and you'll have plenty of advice from our members to consider.
If you need help with a specific question feel free to ask.
Best of luck and a motorized bicycle will certainly fall into the "does somthing" catagory, so your class project should fill the requirements.
Keep us posted on your progress.
Age and Treachery Will Always Triumph
Over Youth and Skill & "Charlie Don't Ride"
Reply With Quote
Old 05-08-2012, 08:00 AM
Bikeguy Joe Bikeguy Joe is offline
Godfather of Motorized Bicycles
Join Date: Jan 2008
Location: up north now
Posts: 11,531
Default Re: Addicted and Havn't Even Started

Welcome to the forum!

Read this-
Reply With Quote
Old 05-08-2012, 08:33 AM
thegnu's Avatar
thegnu thegnu is offline
Motorized Bicycle Elite Member
Join Date: Sep 2011
Location: freedom pa
Posts: 982
Default Re: Addicted and Havn't Even Started

Welcome Aaron, couple of things you need to know about pa laws , you need a licence to ride it on the roads an you have to get it registered here , do not let that stop you with this endeavor ,I have become the resident expert on mb's in pa , I have one already legal here an a second in the works .
four wheels move the body . two wheels move the soul
Reply With Quote
Old 05-08-2012, 09:11 AM
Al.Fisherman's Avatar
Al.Fisherman Al.Fisherman is offline
Motorized Bicycle Elite Member
Join Date: Sep 2009
Location: Calera, Alabama
Posts: 1,966
Default Re: Addicted and Havn't Even Started

First off I want to welcome you to the best motorized bicycle forum I could find. Not only do we have a wide range of knowledgeable members, but the most active, but should you have questions, the response time is really fast.

We have numerous “stickies” that cover just about any aspect on MB’s, along with a “SEARCH” function. Although at times it isn’t the easiest to use. This is due to that the title of the post that isn’t specific enough. Posting titles like “Help” doesn’t help others doing a search, and I and others tend to pass them up at times, only going back a later time, which makes an answer longer to get.

Should you have a question, and to make it easier on members, Please state specifics about your subject, such as a engine problem, tell us what engine you have, along with any other important information that we night need to help you, like what carburetor you have if known. A picture is always helpful. Like the saying a picture is like a 1000 words, also we may see something that might needs to be addressed. Believe me; it happens more often then not. We know that there are those that are not knowledgeable, or are mechanically challenged, so there is not a stupid question, although I think that sometimes, so bear with me. Hey what do you expect with 50 years of wrenches in my hands, but we all had to start somewhere.

For those that are not knowledgeable on the terms of parts on a China 2 cycle (some are specific to these HT engines), here is a link that lists about every HT part. It is real hard for me to understand what a “thingy”, “whatcha ya call it” “thing of a jig” is.

I have a link in my signature that everyone starting out with a Chinese 2 cycle ought to read. This deals with pre installing a HT engine in the frame.

Once again, welcome to the world of MB’s, and have a safe, enjoyable riding experience.
Looking for HT's parts?
HT pre instillation tips.
Engine running problems?
HT breakdown Photos

Ron ><)))))*> Calera, Alabama
Reply With Quote
Old 05-11-2012, 06:31 PM
LR Jerry's Avatar
LR Jerry LR Jerry is offline
Motorized Bicycle Elite Member
Join Date: Dec 2011
Location: Oak Ridge, TN
Posts: 1,019
Default Re: Addicted and Havn't Even Started

You've got some really great people here who want steer you wrong.

Here are important questions to consider when building or buying for yourself or others:

1) What is the predominant riding terrain?
(Level ground, hills, asphalt or dirt etc...)

2) What type of physique does the primary rider have?
(Large, small, short, tall or health issues etc...)

3) What will the rider's local laws allow and require them to have?
(Lookup and personally read these laws.)

4) What kind of bike is being motorized?
(Mountain, road, whizzer or recumbent etc...)

5) What is the bike to be used for?
(Shows, long trips, around town, off road or racing etc...)

6) How much of a budget is to be used for the build or buy?
(All at the start or as you can afford projects etc...)

Seek the answers to these questions in order to get the most out of the bike you're building or buying. We're here to help with any questions you may have. The purpose of the "Questions to Consider" is not to overwhelm or confuse you. Rather help you focus in on what will work best for you and help you develop a building and/or buying philosophy. This site has lots of people who can help you but the only way they can is by asking questions. Any one of the questions to consider somebody here can help you with.

A fool never learns from their mistakes.

A smart person learns from their mistakes.

A wise person learns from the mistakes of others.

Good luck with your build or buy.

"I became rich by hiring people smarter than me". Andrew Carnegie
Land Rider Jerry
Reply With Quote
Old 05-13-2012, 10:27 PM
aaronbentzel aaronbentzel is offline
Motorized Bicycle Newbie
Join Date: May 2012
Location: York
Posts: 15
Default Re: Addicted and Havn't Even Started

Hey guys! I just wanted to let all of you know that I have successfully installed my first engine XD. I am so excited about it. Gary, thanks for the heads up, and I will be sure to read up on the laws so I can get it street legal. The problems I have been having so far are with the chain tensioner. The engine works fine, in fact it started right up the first time, but after about 2 minutes the chain popped off so I am currently adjusting it. Fuel tank was leaking so I just locktited the crap out of it and it seems to be working. I originally tried to put it on my road bike, but at the last minute I realised that it would not fit properly so I had to take everything off. Of course this was after I bent the muffler to fit the bike. I got a new schwin bike though that is working very well. My engine is the grubee skyhawk GT5, the 2011 version. I changed out the spark plugs, but surprisingly I could not find spark plug caps anywhere! I tried two auto zones, tractor supply, true value, and ACE and none had it! Guess im off to SBP! haha. I have a picture below. Hope you like it, because i know i do!
Attached Images
File Type: jpg 100_0034.JPG (142.2 KB, 20 views)
Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

All times are GMT -5. The time now is 10:29 PM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2016, vBulletin Solutions, Inc.