Motorized Bicycle Engine Kit Forum  


Go Back   Motorized Bicycle Engine Kit Forum > Motorized Bicycle > Motorized Bicycle General Discussion

Motorized Bicycle General Discussion All topics regarding bicycles with engines.

Thread Tools Display Modes
Old 07-30-2008, 07:19 PM
Bulletxr1 Bulletxr1 is offline
Motorized Bicycle Newbie
Join Date: Jun 2008
Posts: 4
Default carb problems

my bike seems to be idleing way to high when not moving messed with the idle screw it got worse then messed with throttle cable made no diffrence looked for air leak couldnt find any?? does anyone know what the stock settings for the carb 70cc daxs 2 cycle engine is?? was running fine

Reply With Quote
Old 07-30-2008, 08:10 PM
Bikeguy Joe Bikeguy Joe is offline
Godfather of Motorized Bicycles
Join Date: Jan 2008
Location: up north now
Posts: 11,531
Default Re: carb problems

Loosen the idle screw about four turns from tight (not too tight) turn the dajuster IN on the top of the carb as far as it will go, or until you hava a little freeplay ther. See what happens. If those two don't do it, look inside the carb via the air cleaner opening to see if the slide is going all the way down. If it's not one of the above there is an air leak somewhere.
Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

All times are GMT -5. The time now is 03:26 PM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2016, vBulletin Solutions, Inc.