Hello all- I stumbled upon this forum while researching the chinese engine kits, and trying to figure out weather or not to go that route. Looks like a lot of good information and good people!
The bike I started with is an old Schwinn with a Dixie 2-speed an a LOT of rust- My dad bought the bike 30 years ago, and for the past 25 it has been behind the garage. I pulled it out, flipped the bars, oiled it, stuck a skinny off of my parts bike on the front, and a new tube and tire on the rear:
I rode it around town for a while that way, then got the wild hair going on.
I put my bike together the first time as a front-wheel-drive gizmo using some old model airplane parts. I used an old Supertigre .40 from my pile o' parts, along with a tire from one of my models to form the drivetrain. I built a mount that hung on the springer fork tine on the left out of 1/8" aircraft-grade mahogany ply with basswood as a filler. For a fuel tank, I had a few martinis to finish up a bottle of vermouth, and stuck a slice of brake line off of a Volvo 240 in it for a pickup. I ran a piece of hose from the muffler to the "tank" to pressurize it and allow the tank to be mounted slightly below the engine.
The bike I started with is an old Schwinn with a Dixie 2-speed an a LOT of rust- My dad bought the bike 30 years ago, and for the past 25 it has been behind the garage. I pulled it out, flipped the bars, oiled it, stuck a skinny off of my parts bike on the front, and a new tube and tire on the rear:
![](/proxy.php?image=http%3A%2F%2Fi4.photobucket.com%2Falbums%2Fy130%2Fpietsrock%2FIMG_0499.jpg&hash=402224efc8a8d41e52fe8303e264585e)
![](/proxy.php?image=http%3A%2F%2Fi4.photobucket.com%2Falbums%2Fy130%2Fpietsrock%2FIMG_0496.jpg&hash=5d3067bfabcc7e8490100f33f9f7f036)
I rode it around town for a while that way, then got the wild hair going on.
I put my bike together the first time as a front-wheel-drive gizmo using some old model airplane parts. I used an old Supertigre .40 from my pile o' parts, along with a tire from one of my models to form the drivetrain. I built a mount that hung on the springer fork tine on the left out of 1/8" aircraft-grade mahogany ply with basswood as a filler. For a fuel tank, I had a few martinis to finish up a bottle of vermouth, and stuck a slice of brake line off of a Volvo 240 in it for a pickup. I ran a piece of hose from the muffler to the "tank" to pressurize it and allow the tank to be mounted slightly below the engine.
![](/proxy.php?image=http%3A%2F%2Fi4.photobucket.com%2Falbums%2Fy130%2Fpietsrock%2F002-19.jpg&hash=06a1ff95bc58d6ea8725fb044ccb0e4a)
![](/proxy.php?image=http%3A%2F%2Fi4.photobucket.com%2Falbums%2Fy130%2Fpietsrock%2F003-19.jpg&hash=3790152e3a7ba29cc45e023e2c02c304)
![](/proxy.php?image=http%3A%2F%2Fi4.photobucket.com%2Falbums%2Fy130%2Fpietsrock%2F004-17.jpg&hash=1d0ef6d574bb86706c5d285fa0cf596f)