Motorized Bicycle Engine Kit Forum  

Sponsors



Go Back   Motorized Bicycle Engine Kit Forum > Motorized Bicycle > Motorized Bicycle Accessories

Motorized Bicycle Accessories What are some of your favorite accessories. Saddle bags, apparel ect. Use this area to share them.

Reply
 
Thread Tools Display Modes
  #1  
Old 04-18-2016, 02:27 PM
hazzardous1 hazzardous1 is offline
Motorized Bicycle Newbie
 
Join Date: Mar 2016
Location: illinois
Posts: 19
Default chain tensioners

anyone know of a nylon wheel for the chain tensioners that can be bought at like tractor supply or somewhere?
Reply With Quote
  #2  
Old 04-18-2016, 03:47 PM
2door's Avatar
2door 2door is offline
Super Moderator
 
Join Date: Sep 2008
Location: Littleton, Colorado
Posts: 16,264
Default Re: chain tensioners

You might want to consider using a urethane skate board wheel. You'll have to cut a groove in it for the chain but they work well. Most have bearings instead of bushings.

Look for one that is one piece. The rubber coated ones will come apart when you're grooving it.

Here is just one thread dealing with this subject. http://motorbicycling.com/showthread.php?t=6482
There are several others. Use the 'Search' to find more info.

Tom
__________________
Age and Treachery Will Always Triumph
Over Youth and Skill & "Charlie Don't Ride"

Last edited by 2door; 04-18-2016 at 03:50 PM.
Reply With Quote
  #3  
Old 04-19-2016, 01:49 AM
ZipTie's Avatar
ZipTie ZipTie is offline
Motorized Bicycle Elite Member
 
Join Date: Jan 2016
Location: Mpls Mn
Posts: 636
Default Re: chain tensioners

There is a Red urathane wheel available on ebay but they are all too wide and will go right into your spokes on a motorized bike even though they list them for use on one. Also the bearings were a bad and wont turn free in the one I bought. Money wasted.
Yes as 2 door says, a skateboard wheel of 54mm high x 31 mm wide works perfect. Make sure you get Abec bearings also. you can get a set of 4 wheels for around 7 bucks with 2 abec bearings per wheel on ebay in any color you could want. Black is best as grease wont show. They run smooth as silk. I used a lathe for great results today and a drill and file before that for a painfully slow groove install that was ugly but did work but was unsightly. it takes about 10 min with a course file and drill method to get a shallow groove. Wear a dust mask as the powder you will make on the harder skate board wheel is pretty nasty stuff. Pedaling is also easier with a skate board wheel as the stock tensioner sags as bearings are only on one side causing the wheel to lock up and drag on the side of the chain.
Its also important to use a thin 8mm lock nut on the skateboard wheel install on one side so it has no pressure on the bearings it so it can turn easy.
__________________
"One pull and It's on, one snip and its off"
“Lets not get too technical”
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 06:10 AM.


Sponsors

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
MotorBicycling.com