Motorized Bicycle Engine Kit Forum  

Sponsors



Go Back   Motorized Bicycle Engine Kit Forum > Bicycle Engine Kit Repair - Top Posts > Instructions for Building and Repairing Motorized Bicycle Engine Kits

Instructions for Building and Repairing Motorized Bicycle Engine Kits Classic posts on building, repairing and modifications.

 
 
Thread Tools Display Modes
  #1  
Old 06-24-2008, 07:48 AM
RLorange RLorange is offline
Motorized Bicycle Elite Member
 
Join Date: Jun 2008
Location: Australia
Posts: 127
Default Chinese bicycle motor jet size.

The Jets are the same for both the 70 and 48 engines and are 0.70mm or close.

The 70cc needs a bigger jet for sure. Luckily the jet unscrews from the pin fuel well inside the carby. Even luckier still Dellorto PHBG Main jets are a perfect fit!! and cheap at only $5.

I would try a 0.78mm to 0.80mm or for the 48cc engine and 0.80 - 0.85mm for the 70cc engine. You may have to compensate by raising the clip on the pin.

Very handy that the Chinese engineers thought to match the jets with Dellorto's

Dellorto PHBG Main jets - Google Search


Last edited by Bikeguy Joe; 06-24-2008 at 02:50 PM.
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 12:54 AM.


Sponsors

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
MotorBicycling.com