Motorized Bicycle Engine Kit Forum  

Sponsors



Go Back   Motorized Bicycle Engine Kit Forum > Motorized Bicycle Mechanical Components > Wheels, Brakes and Suspension

Wheels, Brakes and Suspension All about suspensions, rims, tires and disk, drum and caliper brakes

Reply
 
Thread Tools Display Modes
  #1  
Old 12-26-2016, 03:19 PM
runnermike's Avatar
runnermike runnermike is offline
Motorized Bicycle Elite Member
 
Join Date: Nov 2012
Location: Sanford, FL
Posts: 934
Default 10g Spokes

I am wanting to put 10g spokes on my wheels. I need to pre drill my hubs to accept the larger 10g spokes. After a bit of research, I have found 10g spokes to be 3.05mm in diameter. This would call for a #31 drill bit (.120"). Can someone verify this? Thanks
Reply With Quote
  #2  
Old 12-26-2016, 04:02 PM
Tony01's Avatar
Tony01 Tony01 is offline
Motorized Bicycle Elite Member
 
Join Date: Nov 2012
Location: San Jose, CA
Posts: 722
Default Re: 10g Spokes

I dunno how spokes are measured. Going by sheet metal gage is more accurate I think. My 14g spokes measure at .078 but sheet metal gage charts say 14g should be .074. They also say 11g is .120 and 10g is .134. I think 12g should be plenty. I run a 48 spoke rear wheel with 14g spokes on my 212 build and I have had no problems since I put the chain guard in, cause the chain was jumping off and eating many spokes at a time. Since then I've only broken two spokes on opposite sides when I had a hard lowside crash at about 30mph and been riding it like that for approx 2-3 months. Also I hit a hard bump and it looks like my 32 spoke 14g front wheel needs truing, but if I had a shock fork I'm sure it would still be straight.

Your wheels are gonna get a lot heavier with much heavier spokes, and the ride quality is going to suffer.
__________________
I don't always listen to Alice in Chains..... but when I do, SO DO THE NEIGHBORS
MxTrq clutch tuning | msrfan 2spd | 212cc 2spd | 3.5hp 2spd | Thud 2spd | CVT tuning
Reply With Quote
  #3  
Old 12-27-2016, 02:02 PM
racie35's Avatar
racie35 racie35 is offline
Motorized Bicycle Elite Member
 
Join Date: Nov 2012
Location: usa
Posts: 1,697
Default Re: 10g Spokes

They're not gonna gain hardly any weight really just adding spokes. Not enough to bother anything .
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 11:34 AM.


Sponsors

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
MotorBicycling.com