Hey everyone! I have a 2 stroke, China girl, center mount direct drive, 69cc. My spokes on my rear rim keep getting loose and I have to keep retightening them to get the wheel true again. I'm using a sprocket adapter so I'm not using the rag joint set up. It must be caused by the torque or the vibrations. My wheel is just a basic 26" rim with 36 spokes, 7 speed cassette mountain bike wheel, I don't have double sided rims or anything. I'm using a rubber rim strip on the inside already.
To solve this I was thinking of using blue locktite on the spoke threads, getting it true and then letting it dry but I'm wondering if doing this is a waste of time? Has anyone tried this or possibly come up with another solution? I have plenty of grease on my bearings and axle.