So I am going to borrow this hub off of my brother in laws bmx and I am wondering does any one know how this disk brake hub is attached. Is it screwed, swaged, or attached by some other means. And if it is swaged on will it be strong enough to hold the rear sprocket in place or will it slip when torque is applied? In a perfect world I would be able to mount the sprocket behind the disk brake directly to the hub and not the spokes and still be able to use the brake. If this is possible I will need to get a disk brake caliper preferably a hydraulic one best stopping power. thanks and 
out
click on image to see vid
outclick on image to see vid
Last edited:
