My wheels, especially the rear wheel are pretty far out of balance. Is there an easy way for me to balance them with minimal resources as far as bike knowledge and tools are concerned? Or is this something I will have to have done by a bike shop?
Truing/balancing a tire?
- Thread starter Beej
- Start date
Try reading this article: Truing Wheels
You can get a spoke wrench for less than 5 bucks. You can also take both chains off of the bike and raise the bike off of the ground so you can spin the wheel freely.
Article + spoke wrench + freely spinning wheel = true wheels
You can get a spoke wrench for less than 5 bucks. You can also take both chains off of the bike and raise the bike off of the ground so you can spin the wheel freely.
Article + spoke wrench + freely spinning wheel = true wheels
I use solder and wrap the spokes to balance the wheels, it helps A LOT. Also, if you want to spend the money, buy stick on golf club weights.
The place I got the bike will true and balance both tires for $20 so I am taking them down that way.
i think Joe's crazy when he says balancing his wheels helps, but then again, i've never ridden his bikes...
true-ing them, on the other hand, is something everyone should learn. it's great if you can fix your own wobbles without having to take it to the bike shop alla time.
true-ing them, on the other hand, is something everyone should learn. it's great if you can fix your own wobbles without having to take it to the bike shop alla time.
20.00 Thats a super deal it would cost Me twice that to do just one at the bike shops here.
Cheers
Chainmaker
Cheers
Chainmaker
