is there anything i can do to my coaster brake so it would just act like a regular rear wheel without a coaster brake? or do i have to buy a whole new rear wheel
Coaster brake bypass
- Thread starter 1ceCold037
- Start date
I would just get a free wheel hub.
You can't just remove the arm or parts from inside because it won't work properly after that.
You can't just remove the arm or parts from inside because it won't work properly after that.
if i get a free wheel hub can i use that with the same rim the coaster brake was on? cause idk if the rims are different for coaster brakes
I replaced the coaster brake wheel with a mountain bike wheel i already had, so it cost me nothing and i put the crusier tire on it. It works great and all i had to do was put caliper brakes on the front fork and those were free too cause i had them laying around in my parts box.
You could just remove the brake arm on the hub that attaches to your frame and take out the two curved metal piece inside the hub that expand outward when you backpedal.
That doesn't always work... Sometimes when you pedal forward, the sprocket won't engage.
I'm confident that my experience with coaster brake hubs doesn't compare to yours. Thus, I reject my reality and substitue yours...That doesn't always work... Sometimes when you pedal forward, the sprocket won't engage.
Sometimes you can just remove the shoes....but not the arm.
See, now I've added a third dimensional reality.
See, now I've added a third dimensional reality.
I have done the 'remove brake shoes' deal, it worked
(I used that wheel for approx 8-900 miles till the bike frame cracked)
here is a video that tells the full free-coaster conversion
Coaster Conversion
hope that helps
(I used that wheel for approx 8-900 miles till the bike frame cracked)
here is a video that tells the full free-coaster conversion
Coaster Conversion
hope that helps
