grubee gt5, clutch wont disengage
- Thread starter walander
- Start date
u might have to check the cable and adjust brass stopper on wire. so the wheel keeps spinning ?or wont spin? sorry kinda confused with question.
Hey Waylander,
I found the same problem with my new GT5, the clutch wouldn't disengage.
What worked in my case-
-pull clutch case cover
-remove flower, or star nut stay screw
-remove flower, or star nut
-pull clutch plate, with spring
-lock rear wheel in place (a screw driver works)
-remove nut securing clutch drum
-at this point I tried to pull clutch drum off with my fingers, and, click, the clutch freed up.
Through my reading on this site, apparently storage 'helped it get sticky'.
I found the same problem with my new GT5, the clutch wouldn't disengage.
What worked in my case-
-pull clutch case cover
-remove flower, or star nut stay screw
-remove flower, or star nut
-pull clutch plate, with spring
-lock rear wheel in place (a screw driver works)
-remove nut securing clutch drum
-at this point I tried to pull clutch drum off with my fingers, and, click, the clutch freed up.
Through my reading on this site, apparently storage 'helped it get sticky'.
i heard that some of these motor grease will actauly harden in the long wait to get here and the longer wait to get shipped toa custermer so maybe the bearings arent well greased