This is my build thread on my once orange Gary Fischer ive sanded her all down cleaned and re cleaned the frame .
figure it helps if i tell the story of my glorius four stroke i bought the bike and kit long ago got it working rode it around for awhile then bam my trani goes then a week later my engine blows luckly in the driveway well it was fall so i just waited for winter to be over and was gona just try again.
got my toyota so forgot about bikes then my freind at work sales me a 33cc to stroker golden eagle bike kit 100 bones and bam im a junkie hooked again.
datz 510 has the same bike as me and gave me a lot of inspiration to do a real nice job on mine .
Im going to paint the bike tan with the good ol rattle can have already painted the handle bars and fan shroud . only two colors i plan to have are black and tan with as little chrome as possible .
shoulda took a before and after but heres a pic halfway through sanding .
heres my rear bike rack with 2 50 cal ammo cans mounted to the side now these cans hold a great amount of stuff and were easy to mount just used some cable tie bolts and the same bolts worked great for a lock.
i was able to keep a motorcycle battery to light a nice little fog light and all the needed tools for your bike locked up in one in the other i kept my cable and lock for the bike . now this was a great setup but ultimately i feel that the bike rack i used wasnt industrial enough for the cans i think i may switch to some 7.62 mm cans about half as wide as the 50 cal cans should still be able to hold everything i need .
1. plan to do a under the rack gas tank of pvc with infidel on it in black lettering or possibly H.W.N.N (horse with no name ) saw a thread on it realy like the look of it all . tanks should be about 4 inch round 9 inch long .
2.change out the 50 cal to a 7.62 can may put a colapsable basket on one side (just sitting in the garage )
3.mount the 4g 80 10 kit from bicyle-engines.com one of the better deals on the kits out their
4.?(always room for more )
figure it helps if i tell the story of my glorius four stroke i bought the bike and kit long ago got it working rode it around for awhile then bam my trani goes then a week later my engine blows luckly in the driveway well it was fall so i just waited for winter to be over and was gona just try again.
got my toyota so forgot about bikes then my freind at work sales me a 33cc to stroker golden eagle bike kit 100 bones and bam im a junkie hooked again.
datz 510 has the same bike as me and gave me a lot of inspiration to do a real nice job on mine .
Im going to paint the bike tan with the good ol rattle can have already painted the handle bars and fan shroud . only two colors i plan to have are black and tan with as little chrome as possible .
shoulda took a before and after but heres a pic halfway through sanding .
heres my rear bike rack with 2 50 cal ammo cans mounted to the side now these cans hold a great amount of stuff and were easy to mount just used some cable tie bolts and the same bolts worked great for a lock.
i was able to keep a motorcycle battery to light a nice little fog light and all the needed tools for your bike locked up in one in the other i kept my cable and lock for the bike . now this was a great setup but ultimately i feel that the bike rack i used wasnt industrial enough for the cans i think i may switch to some 7.62 mm cans about half as wide as the 50 cal cans should still be able to hold everything i need .
1. plan to do a under the rack gas tank of pvc with infidel on it in black lettering or possibly H.W.N.N (horse with no name ) saw a thread on it realy like the look of it all . tanks should be about 4 inch round 9 inch long .
2.change out the 50 cal to a 7.62 can may put a colapsable basket on one side (just sitting in the garage )
3.mount the 4g 80 10 kit from bicyle-engines.com one of the better deals on the kits out their
4.?(always room for more )