I'm not sure but I think this could be incorporated into a MB build for a better tensioner. What do yo guys think?
Dirt Bike Chain Tensioner
Dirt Bike Chain Tensioner
Baja Motorsports Chain Tensioner Assembly - 5510238 | Tractor Supply Companyi have a tsc and they don't have them
Not the best pic, but the fastest I could get. I used the standard kit bracket. Drilled out a hole just a little in the slide and added my own bolt and lock nut. The spring can make it a little tricky to get on, but after you cuss a little it's done.civilized can you post a picture of how you mounted it please? Thanks bro.
The wheels in all that I have bought do have bearings. I'm using an ATV engine and have had no problems with twisting. Are you talking about the bracket or the arm on the roller?I have bought that exact set-up, the side plate metal is very thin and twists , also the wheel itself has no bearings so it doesnt work to well. I still buy them cause i build alot of stretch cruisers and they work well for a pedal side tensioner to clear the motor.
the bracket itself wanted to twist making the chain come in at a slight angle.The wheels in all that I have bought do have bearings. I'm using an ATV engine and have had no problems with twisting. Are you talking about the bracket or the arm on the roller?
Gotcha about the bracket. The wheel in that picture does in deed have a bearing. If you click the larger view image, you can clearly see it and the snap ring holding it in.the bracket itself wanted to twist making the chain come in at a slight angle.
the unit in that photo doesnt have bearings , neither did mine.
if they now have them with bearings it may work well