I have a Predator 79cc setup with the Affordable Go Karts (AGK) clutch + jackshaft setup. Real happy with it, once I have gotten the hang of it.
Anyway, I have had an issue of the clutch retaining bolt spinning out, from a number of builds / rebuilds. Even with red threadlocker, I was being left occassionaly by the side of the road...
I came up with the attached solution. I hacked up a metal joist hanger with my cutoff saw to make a right angle clip, that fits around the bolt, and attaches with another small bolt to the unused set screw hole on the clutch.
Works fantastic, and I am hoping I can get AGK to make them.
In case anyone else is having this problem with the AGK setup.
Anyway, I have had an issue of the clutch retaining bolt spinning out, from a number of builds / rebuilds. Even with red threadlocker, I was being left occassionaly by the side of the road...
I came up with the attached solution. I hacked up a metal joist hanger with my cutoff saw to make a right angle clip, that fits around the bolt, and attaches with another small bolt to the unused set screw hole on the clutch.
Works fantastic, and I am hoping I can get AGK to make them.
In case anyone else is having this problem with the AGK setup.![IMG_1089[1].JPG](/data/attachments/63/63249-5103c34e8ca5f5fbcc0255f8f17dc233.jpg)
