is opti 2 the way to go with the cg engines?....where do get it and what ratio is recomended?...i have a raw engine and i will be breaking it in soon...any suggestions would be appreciated...thanks.
opti 2
- Thread starter macattie88
- Start date
i ran mine at 60:1 for the first tank, 80:1 for the second, and 100:1 after that.
it runs super clean, perfect plug, no noticeable break-in period, no smoke, no smell...
it rules.
here's a ten page thread:http://motorbicycling.com/f3/100-1-mix-9850.html
it runs super clean, perfect plug, no noticeable break-in period, no smoke, no smell...
it rules.
here's a ten page thread:http://motorbicycling.com/f3/100-1-mix-9850.html
OPTI 2-----Love it. I use it in my very large RC aircraft engines. (weed-eater/chain-saw motors converted to electronic ignition). They run like a Rolex. Im building my first bike now. Hope the Grubee runs as good??? Even started using it in my lawn and garden equip. I get it at the local ACE Hardware. Comes in handy pouches like the frozen cool-aid sticks that used to melt and run down and off the elbows!! No measuring. Just cut the top,squeeze it out and go.
Bill
Bill
