Goat herders gas tank
- Thread starter grizadams
- Start date
The Boxer Morini bikes made by Pipelyne came with plastic GoPed tanks mounted on the fork.
Grizadams they really are solid tanks they will never fall apart. The fuel lines and the venting is another story. I plug off the tank vent hole and drill a couple of ''main carb jet size'' holes discreetly under the fuel cap on all of mine. That has worked flawlessly for me.
You will need to address the fuel line coming out periodically I have to put in a new line there every 8 months or so. The section of line I have coming out of it will be to short to turn the steering wheel other wise. The line naturally pinches off tightly enough not to leak there.. is no nipples on these tanks coming out of them.
Like a weed whacker tank does their fuel lines.
Been gonna devise a way to permanently mount a fuel line nipple on mine just never seem to get around to it and the fuel line the way it is, has worked good enough shrug.
You will need to address the fuel line coming out periodically I have to put in a new line there every 8 months or so. The section of line I have coming out of it will be to short to turn the steering wheel other wise. The line naturally pinches off tightly enough not to leak there.. is no nipples on these tanks coming out of them.
Like a weed whacker tank does their fuel lines.
Been gonna devise a way to permanently mount a fuel line nipple on mine just never seem to get around to it and the fuel line the way it is, has worked good enough shrug.
