tto temp sensor and crmachine head

GoldenMotor.com

graydog8josh

Member
Nov 23, 2012
450
4
18
Starkville,MS
just a tip for anyone trying to put a tto spark plug temp sensor on an engine equipped with a crmachine head. It wont fit. theres not enough clearance in the plug hole, will have to cut some fins or something
 

Davezilla

New Member
Mar 15, 2014
2,705
10
0
San Antonio Texas
Yup... gotta mill off part of the fin by the spark plug opening or carefully dremel it out enough for the lead to fit. A machine shop can mill it just right for pretty cheap usually, but if not, it can be dremeld without taking away from it's good looks if you use a carbide burr and got a steady hand.