pic 1... right side profile
pic 2... rear view showing 16" stabalizer wheels, 300 lb support weight.
stainless steel rims, spokes and bearings.... from fatwheels.com (Brian)
pic 3... my fishing, laundry and shopping wagon
pic 4... going fish'n
pic 5... a couple of things i've found... with the clutch handle in the up position i can work the clutch with the heel of my hand and the brake at the same time.
notice the location of the speedo --
quite a few folks complain that the speedo resets to defaults when the motor starts. the RF from the copper spark plug wire and plug spike the chip in the speedo and resets it. find a place where there is some shielding and the problem goes away.
hope this helps
stay dry
gubba
pic 2... rear view showing 16" stabalizer wheels, 300 lb support weight.
stainless steel rims, spokes and bearings.... from fatwheels.com (Brian)
pic 3... my fishing, laundry and shopping wagon
pic 4... going fish'n
pic 5... a couple of things i've found... with the clutch handle in the up position i can work the clutch with the heel of my hand and the brake at the same time.
notice the location of the speedo --
quite a few folks complain that the speedo resets to defaults when the motor starts. the RF from the copper spark plug wire and plug spike the chip in the speedo and resets it. find a place where there is some shielding and the problem goes away.
hope this helps
stay dry
gubba
Attachments
Last edited:
