What do you see in these Photos ?

GoldenMotor.com

Wheel Rush

New Member
Jun 21, 2008
209
0
0
I didn't find the results of this to humorous !
The only thing I changed in this communication was my name and the last name of Mark, I took out !


--- On Thu, 6/19/08, Wheel Rush wrote:

From: Wheel Rush
Subject: Re: Instruction and maintenance manual
To: [email protected]
Date: Thursday, June 19, 2008, 4:19 PM


As you said below, " the sprocket presses up againt the spokes", . . . I have a problem with the spokes driving the chain off of the sprocket. What to do ?

WR
----- Original Message -----
From: mark
To: WR
Sent: Tuesday, June 17, 2008 10:38 AM
Subject: Re: Instruction and maintenance manual


HEllo, both the rubber washers go together inside around the hub.the sprocket presses up againt the spokes

--- On Mon, 6/16/08,Wheel Rush wrote:

From: Wheel Rush
Subject: Instruction and maintenance manual
To: "KING'S MOTOR BIKES" <[email protected]>
Date: Monday, June 16, 2008, 7:01 PM


This might be why my rear tire is out of alignment ???

Ahh, . . Sorry to bore you with my profound gulability ! But, Can I fix this

slight wobble in my wheel from previous pressure against the spokes ??
 

Attachments

Last edited:

Bikeguy Joe

Godfather of Motorized Bicycles
Jan 8, 2008
11,837
252
63
up north now
What exactly are they trying to tell you?

It goes- sprocket, rubber, spokes, rubber, 2 or 3 pc. metal part, washers, nuts.
 

Wheel Rush

New Member
Jun 21, 2008
209
0
0
I hesitate to say, however the correction has been made but the damage, I'm afraid has been done, . .

Now to fix it, . . Got any ideas, I have a slight wobble in the rear wheel ?
 

Wheel Rush

New Member
Jun 21, 2008
209
0
0
Sorry fairracing31,

It was both first, "the wheel bearing", I am assuming that the dark nut capped before the pedal chain sprocket, going from inside to out is the wheel bearing, yes this was adjusted.

Then I discovered the wheel is out of true, . . which possibly was the reason it unwond the wheel bearing a little on the first run.
 

Wheel Rush

New Member
Jun 21, 2008
209
0
0
I was just at the hardware and their outa spoke wrenches, so I'll hunt around, but thanks much for your replie.