How used a Oil to Gas Mixing Container?

Determine which ratio you wish to use.
Select that column near the top of the bottle.

Go down the column for the measurement of gasoline you have available.
Fill the bottle with your oil to that line.

Pour that measured amount of pre-mix oil into your container of gasoline.

You might wish to pour a bit of gas into the measuring container, and rinse it out, back into the gas can.

Slosh your container of mixed gas/oil around for a minute to assure it is mixed well.

Ready to go.

Best to use a funnel when filling the tank, and have a clean rag handy.
Only fill your tank halfway.
A little bit goes a long way.
Too much might slosh over.

Good luck
rc

24:1 should be just fine with any reasonably quality oil.

Regardless of the oil, IMO, best to take it easy on the new motor until it is broken in. No big hills, no races, no long extended runs.

Good luck
rc

I would go with number 2.