As the title says keg style gas tank that can be mounted or adapted to mount to a seat post. I would also prefer the tank to be 1 gallon size but will not turn from any option that may be offered.
Wanted: Keg Style Gas Tank
- Thread starter jowens
- Start date
I think Simsons or sportsman has them. If no I seen then on some of the other vedors web site. But there not cheap. $$$
View attachment 45060
1 gallon $139 They custom build them 1 to 3 gallons. check them out.
Last edited:
If your still looking...
Look up member " culvercityclassic " as he posted a thread of making those keg style cans out of bean caans and brasing on a bung and nipple
Not sure if he was selling them, but if you PM him, he may make one for you for a fair price!
Look up member " culvercityclassic " as he posted a thread of making those keg style cans out of bean caans and brasing on a bung and nipple
Not sure if he was selling them, but if you PM him, he may make one for you for a fair price!
My brother and I run Coyote-Gear tanks. They're not cheap, but they are very high quality.
Bike on left has the 6x12", bike on right has the 4x8".
Bike on left has the 6x12", bike on right has the 4x8".
or just make one of these...
not quite a gallon but bigger than the peanut. i probly spent $30 or so making it... used the bung/cap & petcock from the peanut tank that came w/kit.
6" CPVC cut 8" long... JB welded the bung inside and out, then used Seal All on the inside over the JB weld... used the orange CPVC cement for the end caps and a dabb of Seal All on the petcock threads.
it's been holding gas for 6 months no leaks, no problems so far.
not quite a gallon but bigger than the peanut. i probly spent $30 or so making it... used the bung/cap & petcock from the peanut tank that came w/kit.
6" CPVC cut 8" long... JB welded the bung inside and out, then used Seal All on the inside over the JB weld... used the orange CPVC cement for the end caps and a dabb of Seal All on the petcock threads.
it's been holding gas for 6 months no leaks, no problems so far.
Look up Silverbear here on the forum. He makes a 48oz tank that is leather wrapped with a brass filler cap
Steve.
Steve.
How about something like this:
http://www.ebay.com/itm/2-Round-Vin...648?pt=LH_DefaultDomain_0&hash=item3f13a16400
http://www.ebay.com/itm/GRAVELY-WAL...881?pt=LH_DefaultDomain_0&hash=item2ebae3bd21
There are lots of old lawn tractor tanks on E-bay you could adapt to a behind the seat set up with a little imagination.
TiM
http://www.ebay.com/itm/2-Round-Vin...648?pt=LH_DefaultDomain_0&hash=item3f13a16400
http://www.ebay.com/itm/GRAVELY-WAL...881?pt=LH_DefaultDomain_0&hash=item2ebae3bd21
There are lots of old lawn tractor tanks on E-bay you could adapt to a behind the seat set up with a little imagination.
TiM
Last edited:
